Home

1 Admin Data

Avionics for Glass Panel

2010-04-10

Avionics 007 Panel 014 Airport Maps 011 Flight Plan 012 Way Points 018 Airport Lineup 005 Pulse 015 Stats

Maintenance 004 Device 009 Device Tic Master 010 Device Tic Marks 016 Air Craft 017 Airport

Systems 013 Alert Colors 008 Display 002 User System xref 001 Users 003 Systems 006 Translate Tables (xlate)

Menu.

The menu has 3 sections.

Avionics	Systems for flying
Maintenance	Data needed to run the system
System	Setup for users and system information

Systems..

Program	Description
Alert Colors	This is where you set up the display colors. Normally good conditions are in Green and bad conditions in Red.
Display	Here you tell the system what instruments look like. It shows the photo width and height and the window display width and height.
User System Xref	A cross reference of system and users and if they can look at it, and or maintain it.
Users	You can add as many users as you like. You also tell each user what systems they have access to.
Systems	A list of systems available. Normally you will not maintain this. It is used to set up the systems and what menu they belong to, and who has access to the systems.
Translate	This is a catch all file that translates field names to values, or descriptions. Normally you will not maintain this information.

Back to top

Program	Description
Device	A definition of the devices you have on your airplane that are interfaced into the system. Give it a description. Tell what Analog interface you are using, and the pin on the device. Give it minimum and maximum values. You tell what panel you want to display the divice on, and the location on the panel.
Device Tic Master	Here you define what tic masters you have. For example you may have some for Fuel, and some for altitude.
Device Tic Marks	Here you define what how and what tic marks you want displayed. For example you may have 10 tic marks for fuel, and display Empty at the bottom, 1/2 in the middle, and Full at the top. You also give it a color. for each tic.
Aircraft	A definition of each aircraft using the system. Information such as speed, altitude, and range are defined.
Airport	Define all the airports you want in the system.

Back to top

Program	Description
Panel	This is where you select the panel you want to display. You can have as many panel displays as you like.
Airport Maps	This displays Google Maps with every airport marked. You can zoom in.
Flight Plan	Create flight plans and way points.
Way Points	The way points you created in the flight plan
Airport Lineup	This will compute a flight plan. You select the aircraft you are flying, the start and end airport, and it will find the best path for your craft between the two airports
Pulse (not working)	Each time a reading is displayed on the panel it is logged. Here you can look at the pulsed readings and create spread sheets. A good place to see things like fuel usage and altitude.
Stats	A look at all the readings on the panel

Back to top